Photogels Premiere Color Correction Gels and Special Effect Gels Kit, 18 Lighting Gels Precut to 2" X 5" with Velcro for 1 Flash

Use the other colored gels to create different colors of light in your photos. Since fluorescent bulbs vary in the amount of green they emit, you will want to try the various strengths of Plusgreen gels to see what works best. This gel pack contains 1 each of the following Rosco gels and Velcro adhesive: Color Correction Gels Full CTO (converts 5500K to 2900K) 1/2 CTO (converts 5500K to 3800K) 1/4 CTO (converts 5500K to 4500K) Full CTB (converts 5500K to 7800K) 1/2 CTB (converts 5500K to 6400K) 1/4 CTB (converts 5500K to 5800K) Full Plusgreen (converts 5500K to roughly match fluorescent) 1/2 Plusgreen (converts 5500K to roughly match fluorescent) 1/4 Plusgreen (converts 5500K to roughly match fluorescent) Special Effect Gels/b> 1/2 Stop Neutral Density 1 Stop Neutral Density 2 Stop Neutral Density Red Primary Green Yellow Magenta Light Blue Dark Blue Velcro Adhesive 7.5" x 3/4" strip of Velcro (soft "Loop" side of Velcro) to stick onto your flash 18 Velcro dots (rough "Hook" side of Velcro) to stick onto the ends of your gels. These gels are cut to 2" x 5" and can be used to change the color temperature of your flash to match various sources of light or to change the overall color of the light to create specific effects. CTO (Color Change Orange) gels are used to decrease the color temperature of your flash to match tungsten and incandescent lighting. CTB (Color Change Blue) gels are used to increase the color temperature of your flash to match overcast lighting outdoors. This Premiere Combo Pack contains 9 color correction gels, 9 special effect gels and enough Velcro to attach all the gels to 1 speedlight flash. Neutral Density gels are used to reduce the power of light from your flash. Plusgreen (Window Green) gels are used to match fluorescent lighting.